Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterES Windows Door Installation: The Lantana Owner’s Guide
ES Windows door installation in Lantana typically runs $1,800 to $4,200 for a standard single swing or sliding unit, depending on impact rating, frame depth, and whether the rough opening needs reframing. We stock ES Windows hardware and keep common frame extrusions on hand for Lantana homes, so most installs start within 3 to 5 business days of the measured survey. Most owners discover their ES Windows door needs replacement when the multipoint lock no longer draws the panels tight, the threshold gap widens enough to pass light, or the sash starts catching at the top - usually after 8 to 14 years of South Florida sun and salt air cycling through the hardware.
Which ES Windows Models This Applies To
ES Windows produces three door series we regularly encounter in Lantana: the ES 5000 Impact Series, the ES 6000 Thermal Break line, and the ES 8000 Architect Series with its deeper 4-5/8 inch frame. The label you need is the white adhesive tag on the hinge jamb or top rail, stamped with a nine-digit ES serial and a date code in the format MM-YY. If that label is sun-faded or painted over, measure the frame depth with the door open: 2-3/4 inch indicates the 5000 series, 3-1/4 inch points to the 6000, and anything over 4 inch suggests the 8000.
We are an independent service provider, not affiliated with ES Windows. For hardware, we source OEM multipoint locks and hinges direct from ES when the series is still in production. For discontinued 5000-series units from the 2012-2018 run, we machine aftermarket stainless hardware to spec rather than force a retrofit that changes the lock spacing. The gotcha most owners miss: the 6000 and 8000 series use different backset dimensions on the handle bore, so a handle marketed for “ES Windows” without a series number often fits poorly and voids the air infiltration rating.
Signs Your ES Windows Door Installation Is Failing
- The multipoint lock throws but the door still rattles in a storm. The lock cam has worn or the keepers have shifted in their mortises. On ES 5000 series units, the zinc alloy keepers soften after repeated salt-air exposure and lose their grip.
- Visible daylight under the threshold or around the jamb weatherstrip. The door has dropped on its hinges or the sill cap has compressed. In Lantana’s sandy soil, slab settlement often tilts the frame before the door itself fails.
- The sash drags or binds at the top corner when closing. The hinge-side jamb has pulled away from the rough opening, or the hinge screws have backed out of the composite reinforcement. This accelerates wear on the hinge pins.
- Condensation between the glass lites of an impact door. The insulated glass unit seal has failed. ES Windows IGU warranties run 10 years from manufacture, not installation, so a 2016 unit may be out of coverage even if it was installed in 2019.
- The handle spins freely or the thumb latch goes limp. The spindle has sheared or the escutcheon set screws have stripped. On ES 6000 series doors from 2015-2019, the spindle diameter was undersized and we replace it with a 9.5mm solid stainless upgrade.
BeforeAfterReplacement Cost & What’s Included
| Scope | Price Range in Lantana |
|---|---|
| ES 5000 single swing, standard rough opening | $1,800 - $2,400 |
| ES 6000 thermal break single swing | $2,400 - $3,200 |
| ES 8000 architect series or oversized unit | $3,200 - $4,200 |
| Rough opening reframing or sill replacement | $400 - $800 additional |
| Discontinued 5000-series custom hardware machining | $180 - $340 additional |
These are installed prices. The range moves with the impact rating required, the glass package (clear, Low-E, or laminated impact), and whether the stucco return needs patching. Every quote we write in Lantana includes the measured survey document you keep, a line-item scope with part numbers, and the photo record delivered after installation. The 365-Day Done Right Promise covers the installation and hardware function; glass seal failures within the ES warranty period are handled direct with the manufacturer, and we document the claim for you.
DIY or Call Us?
There is nothing dangerous about checking your ES Windows door for the symptoms above. A homeowner can verify the label location, measure frame depth, and photograph the gap pattern to send us. What goes wrong fast is attempting to adjust or replace the multipoint lock without supporting the door weight. The lock mechanism on an ES 8000 series unit holds 85 pounds of hardware in a 6-foot-8-inch slab; if the panel shifts while the lock body is removed, the hinge-side jamb can twist and the strike alignment is lost. We have reframed three Lantana openings this year where a well-intentioned owner removed the lock to “clean it” and could not get the door back in plane.
Call (561) 461-2062 to schedule your measured survey. We will bring the correct ES Windows series hardware to that appointment, confirm the rough opening condition, and leave you with a written price that does not change when the crew arrives.
FAQs
In Lantana’s coastal climate, the door frame and impact glass typically last 20 to 30 years, but the hardware - multipoint locks, hinges, and weatherstrip - needs attention every 8 to 14 years. Salt air accelerates corrosion in the keeper mechanisms faster than inland Palm Beach County. Call (561) 461-2062 for an exact quote on hardware refresh or full replacement - estimates are free.
Hardware failures on in-production ES Windows series can usually be repaired with OEM parts. If the frame is square and the glass seal is intact, a lock, hinge, or threshold replacement is the right call. Once the frame itself has warped or the IGU has failed, repair costs approach replacement and we recommend the full unit. Call (561) 461-2062 for an exact quote - estimates are free.
A standard ES Windows single swing replacement in an existing rough opening takes one day. If the opening needs reframing, sill replacement, or stucco patching, plan for two days. We do not promise same-day completion on planned construction work; the Haven Standard requires the measured survey and the final invoice to match, and that takes the time it takes to do correctly. Call (561) 461-2062 to schedule.
We stock multipoint locks, hinges, and threshold caps for the ES 5000, 6000, and 8000 series on our Lantana trucks. Discontinued series hardware is machined to spec within 48 hours. Full door units are ordered to the measured survey, not pulled from a warehouse, because Haven Clause 1 requires the quote and the delivered product to match exactly. Call (561) 461-2062 to schedule your survey.
Sonia Raman still measures rough openings herself on ES Windows jobs along the Lantana beachfront corridor, where the salt air and summer storm cycles she has watched for nearly two decades chew through hardware faster than the inland spec sheets predict. She picked up her first glazing tools in a continuing education program at Los Angeles Trade-Technical College, learning to read a rough opening before she learned to drive on the freeway, and she has spent the better part of two decades since ordering and installing windows and doors across South Florida. She is known for writing down the exact U-factor and impact rating of every unit before a contract is signed. “Measure it right the first time. Everything after that is just paperwork.”
Written by Sonia Raman, Owner, Sightline Windows & Doors Lantana at Sightline Windows & Doors Lantana, serving Lantana and nearby areas.