Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterViewLux Door Installation: The Lantana Owner’s Guide
ViewLux door installation in Lantana typically runs $1,400-$3,200 for a complete replacement, depending on the series, impact rating, and whether the rough opening needs reframing. We stock ViewLux hardware, seals, and track assemblies for same-day repair on most units, and we carry the full ViewLux product line for replacement when the frame or glass pack has failed. Most Lantana owners first notice a problem when the door sticks in humid weather, the lockset won’t engage, or they feel air moving through a gap they cannot locate.
Which ViewLux Models This Applies To
ViewLux manufactures three residential door series that we regularly service in Lantana: the VX-100 entry door, the VX-200 impact-rated entry system, and the VX-Slide patio door series. The VX-100 uses a standard 4-9/16 inch jamb depth; the VX-200 carries a 6-9/16 inch jamb to accommodate the laminated impact glass and reinforced strike plate. The VX-Slide operates on a dual-track roller system with a 2-1/2 inch bottom rail height that differs from every other brand we carry.
To identify your unit, check the etched mark in the glass corner (VX-100, VX-200, or VX-Slide) and the manufacturing sticker on the hinge jamb, which lists the exact rough opening dimensions and the glass code. We do not guess at compatibility. If the sticker is painted over or missing, we measure the slab thickness, jamb depth, and hinge spacing on site, then cross-reference against ViewLux’s published shop drawings.
We are an independent service provider with no affiliation to ViewLux. We source OEM hardware and seals directly from ViewLux distribution, and we stock quality aftermarket rollers and weatherstrip for older series where OEM lead times stretch past two weeks. For impact-rated units, we do not substitute aftermarket glass; the VX-200 requires documented missile-impact certification that only OEM glass carries.
Signs Your ViewLux Door Installation Is Failing
- The door drags or sticks seasonally. In Lantana, summer humidity swells the jamb material on VX-100 units manufactured before 2019, when ViewLux switched to a synthetic composite jamb. The fix is either jamb adjustment or full replacement with the current composite spec. We see this most often in Hypoluxo and the older homes east of Federal Highway.
- Visible daylight between the door and the weatherstrip. The VX-Slide uses a fin-seal design that compresses flat after roughly 8-10 years of daily use in salt air. Once the fin loses memory, the seal is cosmetic only. Replacement requires removing the active panel to access the track-mounted seal channel.
- The multipoint lock won’t throw or retract smoothly. ViewLux uses a Fuhr or Hoppe gearbox depending on the year; the cast zinc housing cracks if the door is forced while locked. A failed gearbox means the deadbolt and hook bolts no longer engage, which is a security issue, not merely a convenience.
- Condensation between the glass panes. This indicates seal failure in the insulated glass unit. On VX-200 impact doors, the glass pack is factory-sealed and cannot be field-repaired; the entire sash must be ordered to specification. Lead time is typically 3-4 weeks for custom sizes.
- The roller carriage grinds or the panel jumps the track. VX-Slide rollers use a sealed bearing that corrodes when the weep holes clog with sand and organic debris, which happens predictably in Lantana’s beachfront zone. We clean the track, verify the panel squareness, and replace the carriage as a matched set.
BeforeAfterReplacement Cost & What’s Included
| Service | Price Range | What’s Included |
|---|---|---|
| VX-100 entry door replacement | $1,400-$2,100 | Door slab, pre-hung jamb, lockset bore, standard hardware, haul-away |
| VX-200 impact entry door replacement | $2,200-$3,200 | Impact-rated slab, reinforced jamb, multipoint lock prep, permit, inspection |
| VX-Slide roller / track repair | $340-$580 | Carriage replacement, track cleaning, panel adjustment, operation test |
| Weatherstrip replacement (any series) | $180-$320 | OEM or matched aftermarket seal, removal of old material, gap verification |
| IGU (glass pack) replacement, VX-200 | $680-$1,100 | Factory-ordered glass unit, installation, re-sealing, documentation |
What moves the price: jamb depth changes, reframing for a larger or smaller rough opening, and the permit/inspection cycle required for impact-rated replacements in Palm Beach County. We pull the permit, schedule the inspection, and include both in the written price. The quote you receive is the measured survey document; the invoice matches it line for line. Every installation carries our 365-Day Done Right Promise under the Haven Standard, and every job leaves a documented photo record.
DIY or Call Us?
There is one safe check a homeowner can make: open the door to 90 degrees, grip the handle, and lift straight up. If the panel moves more than 1/8 inch in the frame, the roller carriage or hinge screws have loosened. Tightening hinge screws is reasonable; anything involving the multipoint lock mechanism, the glass pack, or the track system is not.
ViewLux VX-200 doors weigh 180-240 pounds depending on size. The impact glass is laminated and will not shatter safely if dropped. The multipoint lock stores spring tension that releases unpredictably during disassembly. We have responded to calls in Lantana where a homeowner removed the lock and could not re-secure the door overnight. If you are pricing the work, call us at (561) 461-2062 for a written estimate. The visit is free, and you keep the measured survey whether we do the job or not.
FAQs
A properly installed VX-100 or VX-200 should perform 20-25 years, but the hardware and seals need attention at 8-12 years due to salt air and UV exposure. The VX-Slide roller carriage typically needs replacement at 10 years in beachfront Lantana homes, sooner if the weep system is not cleared seasonally. Call (561) 461-2062 to schedule an operation check; estimates are free.
Hardware, seals, and glass packs can be repaired or replaced independently. The frame itself is replaceable only as a full unit. If the jamb is water-damaged or the rough opening is out of square beyond 1/4 inch, repair is not economical and we will say so in the written scope. Call (561) 461-2062 for an honest assessment.
Most installations finish in one day; VX-200 impact doors requiring permit inspection add one additional site visit for the county sign-off. We schedule the inspection, not the homeowner. Call (561) 461-2062 to confirm current lead times for your specific series and size.
We carry VX-100 and VX-Slide rollers, weatherstrip profiles, and multipoint lock components for series manufactured from 2015 forward. VX-200 glass packs and pre-2015 hardware are ordered to specification with tracking numbers provided. Call (561) 461-2062 with your model and manufacturing date; we will confirm stock before scheduling.
We also stock parts and install units from PGT, CGI, and CWS for Lantana homeowners evaluating alternatives.
Sonia Raman still measures every rough opening personally on jobs over $2,500. She picked up her first glazing tools in a continuing education program at Los Angeles Trade-Technical College, and she has spent the better part of two decades logging work on homes along the Lantana beachfront corridor. She writes down the exact U-factor and impact rating of every unit before a contract is signed. As she tells every crew member: “Measure it right the first time. Everything after that is just paperwork.”
Call (561) 461-2062 to schedule your free estimate. You will receive a measured survey you keep, a written price that does not change, and a documented photo record when the job is done.
Written by Sonia Raman, Owner, Sightline Windows & Doors Lantana at Sightline Windows & Doors Lantana, serving Lantana and nearby areas.