Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterWindows & Doors in Lake Worth, FL
Window and door installation in Lake Worth runs $650-$2,800 per opening depending on frame material, impact rating, and whether the original rough opening needs reframing. Most Lake Worth homes were built between 1950 and 1970 with concrete block walls and original aluminum jalousie or single-pane sliders that no longer meet Palm Beach County’s wind-borne debris code. Call (561) 461-2062 to schedule a measured survey, and we’ll hand you a written price before any work starts.
We install and replace windows and doors across eight product categories under the Haven Standard that has governed every one of our 18,000+ openings since 2012. Our crews are background-checked, uniformed, and identified by license number before arrival. Every job leaves a documented photo record and carries our 365-Day Done Right Promise.
Why Lake Worth Homes Are Different
Lake Worth’s housing stock is dominated by mid-century CBS bungalows and cottages from the 1950s through 1970s, many still carrying original aluminum jalousie windows or single-pane horizontal sliders set into concrete block rough openings. The salt-air microclimate along the Lake Worth Lagoon corrodes frames and degrades glazing seals measurably faster than properties even a mile west, which means windows that should last twenty years often fail in ten.
Palm Beach County’s wind-borne debris region mandates impact-rated glazing or approved storm protection on all replacement installations, a requirement that doesn’t exist in every Florida municipality. In Lake Worth’s historic downtown overlay, the Historic Preservation Board must approve window and door profiles, muntin patterns, and materials before permits can be pulled, a step that adds weeks to jobs that would be routine in neighboring Lantana or unincorporated Palm Beach County. The 1920s Mediterranean Revival and Craftsman-era structures near the historic district carry original wood profiles that complicate direct replacement with modern impact units.
Our Main Lake Worth Services
These are the two services Lake Worth homeowners call about most, plus sliding and patio doors for homes opening onto the lagoon or canal systems.
Window Replacement in Lake Worth
Most calls we get from Lake Worth involve replacing original aluminum jalousie or single-pane slider windows in CBS construction from the 1950s-1970s. The salt-air exposure along the Intracoastal accelerates frame corrosion and seal failure, and Palm Beach County code requires impact-rated replacements. We measure every rough opening, document the existing anchoring pattern, and specify products that meet both the structural load requirements and any historic overlay restrictions. Window Replacement in Lake Worth
Impact Windows & Doors in Lake Worth
Lake Worth sits squarely in Palm Beach County’s wind-borne debris region, so every replacement opening must be impact-rated or protected by approved shutters. We specify PGT, CGI, CWS, and ES Windows products by performance tier and price range, not by margin, and we pull permits and coordinate inspections as part of the scope. The written quote includes the full permit package, so there are no surprises at final invoice. Impact Windows & Doors in Lake Worth
Sliding & Patio Doors in Lake Worth
Lake Worth’s canal-front and lagoon-front properties often have original sliding glass doors from the 1960s-1980s with corroded rollers, failed weatherstripping, and no impact rating. We replace these with multi-panel sliding systems or French door configurations that meet current wind-load requirements while preserving sightlines to the water. Every installation includes a documented photo record of the anchoring and flashing details. Sliding & Patio Doors in Lake Worth
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterWindow Installation in Lake Worth
Window installation in Lake Worth means working with concrete block rough openings from the 1950s-1970s that were never designed for modern impact-rated units, plus salt-air corrosion that has compromised original aluminum frames and anchoring points. We start every job with a measured survey the customer keeps, then specify products from our eight manufacturer lines based on what the opening requires, not what is in stock. Window Installation covers our full methodology, but Lake Worth’s specific conditions, code requirements, and historic overlay restrictions shape every specification we write.
Single & Double Hung Windows
Signs you need it
Original aluminum single-hung windows that won’t stay open, show salt-air pitting at the sill, or leak during summer storms are the most common call we get from Lake Worth’s mid-century neighborhoods.
What it costs in Lake Worth
Single and double hung window installation in Lake Worth typically runs $850-$1,650 per opening for vinyl impact-rated units, with wood-clad and aluminum options from ECO Window Systems and ES Windows ranging higher.
How we do it
We remove the existing unit, inspect the concrete block rough opening for spalling or anchor corrosion, install new tapcon or wedge anchors rated for the specified wind load, flash with self-adhered membrane, and set the new hung window plumb before insulating with low-expansion foam and sealing the perimeter.
Horizontal Roller Windows
Signs you need it
Original horizontal rollers in Lake Worth’s 1960s-1970s ranch homes develop corroded tracks, cracked wheels, and failed locks that leave the sash loose in the frame during high-wind events.
What it costs in Lake Worth
Horizontal roller window installation in Lake Worth typically runs $750-$1,450 per opening for vinyl impact-rated units, with larger three-panel configurations and aluminum frame upgrades from Mr-Glass extending toward the upper end.
How we do it
We document the existing track width and sill condition, remove the old sash and frame, repair or replace corroded sill pans, set the new roller unit on composite shims for drainage slope, anchor through the jamb into the block, and test operation before sealing with backer rod and silicone.
What Window Installation Costs in Lake Worth
| Item | Typical range in Lake Worth |
|---|---|
| Single or double hung vinyl impact window | $850 - $1,650 |
| Horizontal roller vinyl impact window | $750 - $1,450 |
| Wood-clad or aluminum frame upgrade | $1,400 - $2,400 |
How long does window installation take in Lake Worth?
Most residential window installations in Lake Worth are completed in one to three days depending on opening count, with historic overlay projects adding two to four weeks for board approval before permits can be pulled. Call (561) 461-2062 for a timeline based on your specific property and any overlay restrictions.
Will the price change once work starts?
No - Haven Clause 1 means the written quote from our measured survey is the final invoice; we do not issue change orders for conditions we should have identified during survey, and if we miss something, we absorb it. Call (561) 461-2062 to schedule your free measured survey.
Door Installation in Lake Worth
Door installation in Lake Worth means replacing original wood or hollow-core entry units in 1920s-1930s historic district homes, plus corroded aluminum patio doors in mid-century CBS construction that no longer seal against wind-driven rain. The salt-air microclimate along the Lake Worth Lagoon attacks hardware and bottom rails faster than inland properties, and Palm Beach County’s wind-borne debris code requires impact-rated or protected openings on every replacement. Door Installation covers our standard process, but Lake Worth’s mix of historic preservation requirements and mid-century concrete block construction shapes every specification we write.
Entry Doors
Signs you need it
Original wood entry doors in Lake Worth’s historic district show rot at the bottom rail, failed weatherstripping, or single-pane glazing that doesn’t meet current energy or impact codes.
What it costs in Lake Worth
Entry door installation in Lake Worth typically runs $1,200-$2,800 for fiberglass or steel impact-rated units, with solid wood and custom-profile reproductions for historic overlay properties ranging higher.
How we do it
We measure the existing jamb and rough opening, document hinge locations and strike placement for the photo record, remove the old unit, install a composite or pressure-treated sill pan sloped to exterior, set the pre-hung door plumb and square, shim at hinges and lock stile, and seal with low-expansion foam and silicone before installing hardware and testing operation.
Hurricane-Proof Front & Entry Doors
Signs you need it
Your front door faces the Lake Worth Lagoon or an unprotected exposure, has decorative glass without impact rating, or the existing frame shows corrosion where it meets the concrete block.
What it costs in Lake Worth
Hurricane-proof front door installation in Lake Worth typically runs $1,800-$3,500 for impact-rated fiberglass or steel units with laminated glass, with Therma-Tru and CGI options specified by performance tier and price range.
How we do it
We verify the wind-load requirement for the specific exposure, specify the door and frame assembly with Miami-Dade or Florida Product Approval numbers, pull permits, install with rated anchors through the jamb into the block, and coordinate inspection before final hardware installation.
What Door Installation Costs in Lake Worth
| Item | Typical range in Lake Worth |
|---|---|
| Standard entry door (fiberglass/steel) | $1,200 - $2,800 |
| Hurricane-proof front door with impact glass | $1,800 - $3,500 |
| Historic reproduction or custom profile | $2,500 - $4,200 |
Do you pull permits for door replacement in Lake Worth?
Yes - Palm Beach County requires permits for all door replacements in the wind-borne debris region, and Lake Worth’s historic overlay adds a separate Historic Preservation Board approval step that we coordinate as part of our scope. Call (561) 461-2062 and we’ll verify your property’s requirements during the measured survey.
How do I know if my door needs impact rating?
Every replacement door in Lake Worth’s wind-borne debris region must be impact-rated or paired with approved storm shutters; we check your property’s exposure and code designation during survey and specify accordingly, with the rating documented on the written quote. Call (561) 461-2062 for a free assessment.
Energy-Efficient Windows in Lake Worth
Energy-efficient window installation in Lake Worth addresses the specific penalty of single-pane aluminum windows in 1950s-1970s CBS construction, where summer cooling loads run high and original units conduct heat directly through the frame. The salt-air environment compounds the problem by corroding frames and degrading seals, so even windows that were replaced fifteen years ago may be underperforming. Energy-Efficient Windows covers our full selection methodology, but Lake Worth’s combination of mid-century housing stock, coastal microclimate, and strict wind-load requirements means we specify for all three factors simultaneously.
Low-E & Argon Gas Glass
Signs you need it
Your windows are hot to the touch in afternoon sun, your AC runs continuously July through September, or you can feel radiant heat through the glass from three feet away.
What it costs in Lake Worth
Low-E and argon gas window installation in Lake Worth typically runs $950-$1,750 per opening for vinyl impact-rated units with soft-coat Low-E and dual-pane argon fill, with triple-pane and krypton upgrades available from select manufacturer lines.
How we do it
We measure each opening, specify the glazing package by U-factor and SHGC values appropriate for Lake Worth’s cooling-dominated climate, order with argon fill and warm-edge spacers, and install with continuous perimeter sealing to prevent gas loss over time.
ENERGY STAR Replacement Windows
Signs you need it
Your current windows carry no NFRC label, your summer electric bills exceed $300 monthly for a 1,500-square-foot home, or you’re replacing failed units and want verified performance data.
What it costs in Lake Worth
ENERGY STAR replacement window installation in Lake Worth typically runs $1,100-$2,000 per opening for certified vinyl impact-rated units, with the specific product selected from our eight manufacturer lines by the NFRC data, not by margin.
How we do it
We document the existing U-factor and SHGC if available, specify replacement units that meet or exceed ENERGY STAR Southern Zone criteria, install with proper flashing and air sealing, and leave the customer the NFRC certificate and documented photo record.
What Energy-Efficient Windows Costs in Lake Worth
| Item | Typical range in Lake Worth |
|---|---|
| Low-E/argon dual-pane vinyl impact window | $950 - $1,750 |
| ENERGY STAR certified replacement window | $1,100 - $2,000 |
| Triple-pane or krypton fill upgrade | $1,600 - $2,800 |
Will energy-efficient windows lower my electric bill in Lake Worth?
Yes - replacing single-pane aluminum windows with Low-E argon dual-pane units typically reduces cooling load 15-25% in Lake Worth’s climate, with exact savings depending on orientation, shading, and existing insulation; we calculate an estimated annual savings figure during survey and include it on the written quote. Call (561) 461-2062 for a specific projection.
Do energy-efficient windows also meet impact requirements?
Yes - every energy-efficient window we specify for Lake Worth carries the impact rating required by Palm Beach County’s wind-borne debris code, with the specific Miami-Dade or Florida Product Approval number listed on the written quote before any work starts. Call (561) 461-2062 to review the certification documents.
Impact Garage Doors in Lake Worth
Impact garage door installation in Lake Worth addresses a vulnerability that many homeowners overlook: the garage door is the largest opening in most homes and the most likely failure point during a wind event. Mid-century CBS homes in Lake Worth often carry original non-rated sectional doors or lightweight roll-up units that provide no wind-borne debris protection, and the large surface area creates significant pressure loading that can compromise the entire structure. Impact Garage Doors covers our full specification process, but Lake Worth’s wind-borne debris region status and the prevalence of single-car and two-car garages in 1950s-1970s construction shape every recommendation we make.
Hurricane-Rated Garage Doors
Signs you need it
Your garage door lacks a wind-load sticker, flexes visibly in afternoon thunderstorms, or was installed before 2002 when Palm Beach County adopted its current wind-borne debris requirements.
What it costs in Lake Worth
Hurricane-rated garage door installation in Lake Worth typically runs $1,800-$3,500 for a single-car impact-rated sectional door, with two-car widths and wind-load upgrades for exposed lagoon-front properties extending toward $4,500.
How we do it
We measure the opening and calculate the design pressure for the specific exposure, specify a door and track assembly with Miami-Dade or Florida Product Approval, remove the old unit and hardware, install the new track with reinforced brackets anchored into the concrete block header and jambs, and test operation and auto-reverse before final inspection.
Wind-Load Code Compliance
Signs you need it
You’re replacing any garage door in Lake Worth and want to verify the installation meets current Palm Beach County wind-borne debris requirements for your specific exposure category.
What it costs in Lake Worth
Wind-load code compliance verification and garage door installation in Lake Worth typically runs $2,200-$4,200 when structural reinforcement of the header or jambs is required, with the exact scope determined by our measured survey and documented on the written quote.
How we do it
We assess the existing header size and anchoring, calculate the required design pressure for the site-specific wind speed and exposure, specify the door and any required structural reinforcement, pull permits, install with documented anchor torque values, and coordinate county inspection.
What Impact Garage Doors Costs in Lake Worth
| Item | Typical range in Lake Worth |
|---|---|
| Single-car hurricane-rated sectional door | $1,800 - $3,500 |
| Two-car hurricane-rated sectional door | $2,800 - $4,500 |
| Wind-load compliance with structural reinforcement | $2,200 - $4,200 |
Does my garage door need to be impact-rated in Lake Worth?
Yes - Palm Beach County’s wind-borne debris region requires all garage doors to be impact-rated or protected by approved shutters, and the large door area makes this one of the most critical openings to address; we calculate the specific design pressure for your exposure during survey and specify accordingly. Call (561) 461-2062 for a written specification.
Can you reinforce my existing garage door instead of replacing it?
Generally no - retrofit kits for older non-rated doors rarely achieve the consistent performance of a factory-engineered impact-rated assembly, and most insurance and code officials require the complete approved door and track system; we assess existing units during survey but typically recommend full replacement for reliable compliance. Call (561) 461-2062 to review your specific door.
Custom & Geometric Windows in Lake Worth
Custom and geometric window installation in Lake Worth serves two distinct housing types: the 1920s-1930s Mediterranean Revival and Craftsman structures in the historic district, where standard rectangular replacements destroy architectural character, and the mid-century modern and contemporary homes along the lagoon where architects specified unusual shapes for view maximization. Both situations require precise field measurement, often with templates, and coordination with Palm Beach County’s wind-borne debris requirements that complicate non-standard configurations. Custom & Geometric Windows covers our full process, but Lake Worth’s historic overlay restrictions and salt-air exposure create specific challenges we address in every specification.
Geometric & Shaped Windows
Signs you need it
Your home has trapezoids, triangles, octagons, or circular windows that are leaking, fogged, or framed in rotted wood, and standard rectangular replacements won’t fit the opening or preserve the design intent.
What it costs in Lake Worth
Geometric and shaped window installation in Lake Worth typically runs $1,400-$3,200 per opening for vinyl impact-rated custom configurations, with complex multi-sided units and wood interior cladding from ES Windows or ECO Window Systems extending higher.
How we do it
We create a field template or 3D measurement of the existing opening, submit to the manufacturer for engineering review and wind-load certification, coordinate any historic overlay approval for profile and muntin pattern, and install with custom flashing kits once the unit arrives.
Arched & Curved Windows
Signs you need it
Your Mediterranean Revival or Spanish Colonial home has arched openings with failing single-pane glass, corroded steel frames, or stucco damage at the spring line from years of water intrusion.
What it costs in Lake Worth
Arched and curved window installation in Lake Worth typically runs $2,200-$4,500 per opening for impact-rated vinyl or aluminum units with custom radius heads, with divided-light patterns and historic reproduction profiles adding to the scope.
How we do it
We measure the radius, spring line, and jamb depth with a field template, specify the arched unit with Miami-Dade or Florida Product Approval for the calculated design pressure, coordinate Historic Preservation Board review if the property is in the overlay, and install with pre-formed arched flashing and documented photo record.
What Custom & Geometric Windows Costs in Lake Worth
| Item | Typical range in Lake Worth |
|---|---|
| Geometric shaped window (trapezoid, triangle, octagon) | $1,400 - $3,200 |
| Arched or curved window with radius head | $2,200 - $4,500 |
| Historic reproduction with custom muntin pattern | $2,800 - $5,200 |
How long do custom windows take to manufacture for Lake Worth?
Custom geometric and arched windows typically require eight to fourteen weeks from field measurement to delivery, with Lake Worth’s historic overlay properties adding two to four weeks for board approval before manufacturing can begin; we coordinate the entire timeline and provide a written schedule with the quote. Call (561) 461-2062 to start the measured survey.
Can custom windows still be impact-rated?
Yes - every custom and geometric window we specify for Lake Worth carries the impact rating required by Palm Beach County, with the Miami-Dade or Florida Product Approval number verified before we submit the order; the rating is documented on the written quote and the unit label. Call (561) 461-2062 to review certification for your specific shape.
Brands We Service in Lake Worth
We specify from eight verified manufacturer lines - PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux - selected by what the opening requires, not by margin. Common hardware, weatherstripping, and sash balances for Therma-Tru and ES Windows are stocked locally, which means most repair calls don’t wait on shipping. our brands
Pricing for Windows & Doors in Lake Worth, FL
| Service | Typical range in Lake Worth |
|---|---|
| Single/double hung vinyl impact window | $850 - $1,650 |
| Horizontal roller vinyl impact window | $750 - $1,450 |
| Wood-clad or aluminum frame upgrade | $1,400 - $2,400 |
| Standard entry door (fiberglass/steel) | $1,200 - $2,800 |
| Hurricane-proof front door with impact glass | $1,800 - $3,500 |
| Low-E/argon dual-pane vinyl impact window | $950 - $1,750 |
| ENERGY STAR certified replacement window | $1,100 - $2,000 |
| Single-car hurricane-rated garage door | $1,800 - $3,500 |
| Two-car hurricane-rated garage door | $2,800 - $4,500 |
| Geometric shaped window | $1,400 - $3,200 |
| Arched or curved window | $2,200 - $4,500 |
Prices in Lake Worth push toward the higher end when concrete block rough openings need reframing, historic overlay approval requires custom profiles, or lagoon-front exposure demands higher wind-load ratings. Haven Clause 1 means the written quote from our measured survey is the final invoice - we do not issue change orders for conditions we should have identified.
Neighborhoods We Serve in Lake Worth
We install and replace windows and doors throughout Lake Worth, from the historic downtown overlay to the mid-century subdivisions west of Interstate 95 and the canal-front properties along the Lake Worth Lagoon. Crews are dispatched from our Miami office and typically arrive within scheduled windows across the metro area.
- Historic Downtown Lake Worth
- Parrot Cove
- South Palm Park
- College Park
- Riverwalk
Service Area - Cities Near Lake Worth
We serve the full Palm Beach County corridor from our Miami coordination office, with crews working daily in Wellington, FL, Greenacres, FL, Royal Palm Beach, FL, and Boynton Beach, FL. Every job in these cities follows the same Haven Standard: measured survey, written price before work starts, verified crew, documented photo record, and 365-Day Done Right Promise.
Serving Lake Worth, FL - Our Local Coverage Area
We’re based in the Lake Worth area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Windows & Doors in Lake Worth
Only if your property sits within the downtown historic overlay district, where the board reviews profiles, muntin patterns, and materials before permits can be pulled; we identify overlay status during our measured survey and coordinate the approval as part of our scope, with the timeline documented on the written quote.
Calls are answered by a live person 24/7, and we typically schedule measured surveys within a few business days; installation timelines depend on product availability and any historic overlay approval requirements, with the full schedule written into the quote before you commit.
Yes - we provide the product specifications, Miami-Dade or Florida Product Approval numbers, and installation details most Lake Worth HOAs require for architectural review, and we coordinate directly with your property manager or board if needed; the documentation becomes part of your project file and photo record.
Call (561) 461-2062 to schedule your free measured survey. We’ll hand you a written price before any work starts, and that document will be the same one you see on the final invoice.
What happens when you call
- 1A real person answersNo phone trees - talk to a local windows & doors pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Lake Worth Customers Say
"The survey measurements and the quote were the same piece of paper. Nothing changed on install day, which is not what happened with the two other companies we had out."
- Annette R."Front door install went smoothly. Written warranty, clear price, no pressure to upgrade anything."
- Nils H."Good crew, tidy install, finished a day early. Paperwork had the license number on it."
- Barry L.