Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterWindows & Doors in Wellington, FL
Window and door installation in Wellington, FL typically ranges from $650 for a standard vinyl replacement window to $8,500 for a full-impact entry door system, with most single-family homes falling between $4,200 and $14,000 for a complete opening upgrade. We install and replace windows and doors across Wellington’s 1985-2000 housing stock, where original builder-grade aluminum single-pane windows and non-impact doors still dominate subdivisions like Olympia, Binks Forest, and Palm Beach Polo. Call (561) 461-2062 to schedule your free measured survey; the written quote we leave with you is the same document that governs the installation.
Why Wellington Homes Are Different
Wellington’s master-planned development boom from the mid-1980s through the early 1990s left the village with a dense concentration of pre-Hurricane Andrew aluminum-frame, single-pane windows that predate Florida’s post-1994 impact-resistance mandates. Palm Beach County insurers now aggressively require wind-mitigation inspections and offer steep premium discounts, or issue non-renewal notices, for homes without impact-rated openings. This makes insurance-driven window and door replacement the dominant sales conversation in nearly every Wellington neighborhood.
The inland position, roughly 12-15 miles from the Atlantic, places Wellington in a lower wind-speed design zone than coastal Palm Beach communities, but it remains fully within the South Florida High-Velocity Hurricane Zone where Miami-Dade-approved or FBC-compliant impact products are required for any permitted replacement. Salt-spray corrosion is meaningfully reduced compared to oceanfront towns, yet intense afternoon humidity and daily summer thunderstorms accelerate weatherstripping failure and frame seal degradation on aging 1980s-era aluminum units. On equestrian estates, Palm Beach County code enforcement applies wind-load requirements to outbuildings, barns, tack rooms, and covered arena entries, a permitting nuance that catches out-of-county crews off guard during the January-April show season rush.
Our Main Wellington Services
Most Wellington homeowners who call us are navigating insurance non-renewal or wind-mitigation requirements. These are the two services they ask about first.
Window Replacement in Wellington
We replace original aluminum single-pane windows throughout Wellington’s 1985-2000 subdivisions with impact-rated or energy-efficient systems that satisfy current Palm Beach County wind-load requirements. In Olympia and Binks Forest, we regularly find frame corrosion at the sill and failed glazing seals that show as fog between panes. Window Replacement in Wellington includes a measured survey you keep, written scope, and documented photo record under the Haven Standard.
Impact Windows & Doors in Wellington
Impact windows and doors are the primary path to wind-mitigation credits and insurance compliance in Wellington, where non-renewal notices have accelerated demand. We specify PGT, CGI, CWS, and ES Windows products by performance tier and price range, not by margin, and pull permits for every job. Impact Windows & Doors in Wellington covers full-opening replacement with Miami-Dade-approved or FBC-compliant systems.
Sliding & Patio Doors in Wellington
Wellington’s original sliding glass doors from the 1980s and 1990s suffer from corroded rollers, failed weatherstripping, and single-pane glazing that leaks conditioned air and fails impact standards. We replace these with multi-panel sliding systems or French door configurations, measured to the existing rough opening to avoid structural modification. Sliding & Patio Doors in Wellington includes the same written-price guarantee and photo documentation.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterWindow Installation in Wellington
Wellington’s original housing stock was built with builder-grade aluminum single-pane windows that now fail on three fronts: impact resistance, thermal performance, and operability. We install replacement windows across the village’s concrete-block homes, from standard hung units in Binks Forest to oversized sliders in equestrian estates, with every job governed by the Haven Standard’s requirement that the measured survey and final invoice match exactly. Window Installation begins with the survey you keep and ends with the 365-Day Done Right Promise.
Single & Double Hung Windows
Signs you need it
The sashes no longer stay open without a prop, or you feel drafts at the meeting rail where the original weatherstripping has compressed to nothing.
What it costs in Wellington
A standard vinyl single-hung replacement runs $650-$1,200 per opening; impact-rated aluminum double-hung units range $1,400-$2,800 depending on size and glazing specification.
How we do it
We measure the existing frame opening to 1/16 inch, specify the replacement unit from our PGT or CGI lines, remove the old frame without disturbing interior trim when possible, install with corrosion-resistant fasteners into the concrete block, seal with backer rod and silicone, and photograph every step for the documented record.
3-Panel Sliding (3-Lite Roller) Windows
Signs you need it
The center panel drags on the track, the rollers have flat-spotted from debris intrusion, or the original single-pane glass transmits enough heat to warp nearby blinds.
What it costs in Wellington
Three-lite sliding window systems range $2,200-$4,500 installed for vinyl frames; impact-rated aluminum 3-panel units with laminated glass run $3,800-$7,200 depending on overall width and design pressure rating.
How we do it
We verify the structural header capacity for the wide rough opening common in Wellington’s 1990s great-room plans, install a reinforced sill pan with end dams, level the track system to manufacturer spec, and test every panel for smooth operation before sealing and documenting.
What Window Installation Costs in Wellington
| Item | Typical range in Wellington |
|---|---|
| Vinyl single-hung replacement | $650 - $1,200 |
| Impact aluminum double-hung | $1,400 - $2,800 |
| 3-panel sliding (vinyl) | $2,200 - $4,500 |
| 3-panel sliding (impact aluminum) | $3,800 - $7,200 |
Do you pull permits for window replacement in Wellington?
Yes. Palm Beach County requires permits for all window replacements in the High-Velocity Hurricane Zone, and we pull them on every job. The permit package includes our product approval documentation, installation detail drawings, and wind-load calculations; we schedule and pass inspection before final payment. Call (561) 461-2062 to schedule your free measured survey.
How long does window installation take in Wellington?
Most residential window replacements complete in one to two days for a typical home with 8-12 openings. Equestrian estates with oversized or specialty units may extend to three days. We arrive on schedule, work continuously, and leave a documented photo record. Call (561) 461-2062 for a written timeline with your estimate.
Door Installation in Wellington
Wellington’s 1985-2000 homes were built with hollow-core or non-impact fiberglass entry doors that predate the 2002 Florida Building Code and fail current wind-mitigation inspections. We install replacement entry, patio, and specialty doors across the village, from standard single-family homes in Olympia to estate properties with custom oversized openings, with every installation documented under Haven Clause 4. Door Installation includes the measured survey you keep and the written price before any work starts.
Entry Doors
Signs you need it
The door slab has delaminated at the bottom from humidity intrusion, the jamb is soft at the sill from splash-back, or the deadbolt no longer seats flush due to frame racking.
What it costs in Wellington
Standard fiberglass entry door replacement ranges $1,800-$3,500; impact-rated steel or fiberglass systems with laminated glass sidelites run $3,200-$6,800 depending on size and hardware specification.
How we do it
We remove the existing unit, inspect the rough opening for block damage or moisture intrusion common in Wellington’s humid summers, install a pre-hung or slab system with composite or aluminum sill, shim plumb with composite wedges, fasten with structural screws into the block, and seal with backer rod and polyurethane sealant before photographing.
Hurricane-Proof Front & Entry Doors
Signs you need it
Your insurance inspector has flagged the entry door as non-compliant, or you’ve received a non-renewal notice citing the lack of a rated opening protection.
What it costs in Wellington
Impact-rated entry door systems with Miami-Dade approval range $3,200-$6,800 for standard 3-0 x 6-8 openings; oversized single or double doors with sidelites and transoms run $5,500-$12,000.
How we do it
We specify the design pressure rating from our Therma-Tru or ES Windows lines based on your home’s exposure and the county’s wind-speed map, submit product approval and installation details with the permit, install with impact-rated hardware and multi-point locking, and provide the documentation your insurer requires for mitigation credits.
What Door Installation Costs in Wellington
| Item | Typical range in Wellington |
|---|---|
| Standard fiberglass entry door | $1,800 - $3,500 |
| Impact-rated entry door system | $3,200 - $6,800 |
| Oversized impact door with sidelites | $5,500 - $12,000 |
Do impact entry doors qualify for insurance discounts in Wellington?
Yes. Palm Beach County insurers apply wind-mitigation credits for impact-rated openings documented with a Miami-Dade Notice of Acceptance or Florida Product Approval. We provide the paperwork with every installation. Call (561) 461-2062 to review your current policy requirements.
Can you match my existing door color and style?
Our Therma-Tru and ES Windows lines offer standard and custom finish options including wood-grain fiberglass, smooth paint-ready, and prefinished colors. We bring physical samples to the measured survey and document your selection in writing. Call (561) 461-2062 to schedule.
Energy-Efficient Windows in Wellington
Wellington’s original aluminum single-pane windows transfer heat at rates that strain air conditioning systems through the daily summer thunderstorm cycle and intense afternoon humidity. We install energy-efficient replacement windows that reduce solar heat gain and thermal transfer, with specifications documented in the measured survey so you can compare U-factor and SHGC ratings across product lines. Energy-Efficient Windows are specified by performance tier and price range, not by what is in stock.
Low-E & Argon Gas Glass
Signs you need it
Your west-facing rooms spike 8-12 degrees in mid-afternoon, or your energy bills climb through June through September despite consistent thermostat settings.
What it costs in Wellington
Low-E coating with argon gas fill adds $80-$150 per opening to standard replacement window pricing; for a complete Low-E/argon system, expect $850-$1,650 per opening in vinyl or $1,650-$3,200 in impact-rated aluminum.
How we do it
We calculate the solar heat gain coefficient appropriate for Wellington’s latitude and your home’s orientation, specify the Low-E coating type and argon fill from our ECO Window Systems or Mr-Glass lines, verify the spacer system is warm-edge to prevent seal failure in high humidity, and document the rated performance values in your written scope.
ENERGY STAR Replacement Windows
Signs you need it
You’re replacing windows for energy performance and want the certification documentation for federal tax credit eligibility or utility rebate programs.
What it costs in Wellington
ENERGY STAR-certified vinyl replacement windows range $950-$1,850 per opening; impact-rated ENERGY STAR aluminum systems run $1,850-$3,600 depending on size and design pressure requirements.
How we do it
We verify the specific product’s ENERGY STAR certification for the South Florida climate zone, confirm the U-factor and SHGC meet or exceed program requirements, install with proper air sealing to prevent infiltration that would void the rated performance, and provide the certification documentation for your tax preparer.
What Energy-Efficient Windows Costs in Wellington
| Item | Typical range in Wellington |
|---|---|
| Low-E/argon upgrade (add to base window) | $80 - $150 per opening |
| Complete Low-E/argon vinyl system | $850 - $1,650 |
| ENERGY STAR impact aluminum | $1,850 - $3,600 |
Will energy-efficient windows lower my electric bill in Wellington?
Most Wellington homeowners see measurable reduction in cooling load, particularly on west and south exposures, though savings vary with home size, shading, and existing insulation. We document the rated U-factor and SHGC so you can calculate payback. Call (561) 461-2062 for a written performance estimate.
Do energy-efficient windows qualify for tax credits?
ENERGY STAR-certified windows and doors may qualify for federal energy efficiency tax credits depending on current IRS guidance; we provide the manufacturer certification statement with every qualifying installation. Call (561) 461-2062 to confirm current program status.
Impact Garage Doors in Wellington
Wellington’s equestrian estates and standard subdivisions alike include garage doors that predate impact requirements, with non-rated panels, tracks, and hardware that fail wind-mitigation inspections. We install impact-rated garage door systems that satisfy Palm Beach County’s High-Velocity Hurricane Zone requirements, with permits pulled and inspections passed on every job. Impact Garage Doors include the same written-price guarantee and documented photo record as every Haven Standard installation.
Hurricane-Rated Garage Doors
Signs you need it
Your insurance inspection flagged the garage door as non-compliant, or the existing door is a thin uninsulated steel or wood panel with no wind-load rating sticker.
What it costs in Wellington
Hurricane-rated garage door systems range $2,800-$5,500 for a standard 16×7 two-car opening; oversized custom widths for estate garages or barns run $4,500-$9,500 depending on wind-load rating and insulation package.
How we do it
We measure the existing opening and calculate the required design pressure from Palm Beach County’s wind-speed map, specify a rated door, track, and hardware system from our approved lines, pull the permit with engineering documentation, install with proper anchorage into the concrete header and jambs, and pass county inspection before final payment.
Wind-Load Code Compliance
Signs you need it
You’re selling the home and the buyer’s inspector or lender requires documentation of code-compliant garage door protection, or you’ve received a code violation notice.
What it costs in Wellington
Wind-load compliance verification and upgrade of an existing rated door with proper hardware and documentation runs $850-$1,800; full replacement with a new rated system runs $2,800-$5,500 for standard sizes.
How we do it
We inspect the existing door for a visible wind-load rating label, test the track anchorage and roller engagement, replace non-compliant hardware with rated components if the door itself qualifies, or specify and install a complete rated system if needed, with all documentation submitted for permit and inspection.
What Impact Garage Doors Costs in Wellington
| Item | Typical range in Wellington |
|---|---|
| Standard hurricane-rated garage door (16×7) | $2,800 - $5,500 |
| Oversized custom estate/barn door | $4,500 - $9,500 |
| Wind-load compliance upgrade (hardware/docs) | $850 - $1,800 |
Do I need a permit to replace my garage door in Wellington?
Yes. Palm Beach County requires permits for all garage door replacements in the High-Velocity Hurricane Zone, with product approval and installation detail submissions. We handle the entire permit process, including inspection scheduling. Call (561) 461-2062 to start.
Will an impact garage door lower my insurance premium?
Impact-rated garage doors contribute to the opening protection portion of the wind-mitigation inspection, which insurers use to calculate discounts. The exact savings depend on your carrier and current policy; we provide the documentation your inspector needs. Call (561) 461-2062 to review.
Custom & Geometric Windows in Wellington
Wellington’s equestrian estates and custom homes from the 1990s and 2000s include arched transoms, circular accent windows, and oversized great-room openings that standard replacement products cannot fit. We measure, specify, and install custom and geometric windows from our PGT, CGI, and ViewLux lines, with every unit engineered to the specific rough opening and wind-load requirements. Custom & Geometric Windows require the same documented precision as standard rectangles; the Haven Standard does not relax for irregular shapes.
Arched & Curved Windows
Signs you need it
The arched transom above your entry door has developed a stress crack at the spring point, or the curved sash no longer seals against the frame due to frame racking in the block opening.
What it costs in Wellington
Custom arched or curved-top windows range $1,800-$4,200 for standard widths up to 72 inches; oversized or compound curves with impact-rated laminated glass run $3,500-$8,500 depending on radius complexity and glazing specification.
How we do it
We take a field template of the existing arched opening using flexible tracing material, verify the radius and spring-line dimensions, transmit the template to the manufacturer for CAD verification, receive the custom unit with integrated jamb and sill, and install with shimming that accommodates the curve without distorting the frame.
Oversized Openings
Signs you need it
Your great room or equestrian estate living space has a window or door unit exceeding 96 inches in width or height that has failed, and standard replacement catalogs do not list the size.
What it costs in Wellington
Oversized custom windows and door systems range $4,500-$12,000 depending on dimensions, frame material, and impact rating; multi-panel sliding wall systems for estate applications run $8,500-$22,000.
How we do it
We verify structural header capacity with a structural engineer when required by span, specify reinforced frames and laminated glass from our ViewLux or CGI custom lines, coordinate crane or specialized handling for units exceeding manual carry limits, and install with continuous sill support and structural anchorage documented in the photo record.
What Custom & Geometric Windows Costs in Wellington
| Item | Typical range in Wellington |
|---|---|
| Arched/curved window (standard width) | $1,800 - $4,200 |
| Oversized custom window/door system | $4,500 - $12,000 |
| Multi-panel sliding wall (estate) | $8,500 - $22,000 |
How long does a custom window order take in Wellington?
Custom and geometric windows typically require 6-10 weeks from measured survey to delivery, with complex compound curves or oversized units at the longer end. We provide a written production timeline with your estimate and update you at fabrication milestones. Call (561) 461-2062 to schedule the initial survey.
Do custom windows need engineering approval in Wellington?
Oversized or non-standard configurations often require structural engineering review of the header and anchorage, which we coordinate as part of our permit package. The engineering stamp is included in our scope, not added later. Call (561) 461-2062 for specifics on your opening.
Brands We Service in Wellington
We draw from eight verified manufacturer lines for Wellington installations: PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux. Each is specified by what the opening requires, not by what is in stock. We maintain local parts inventory for ES Windows, ECO Window Systems, and Therma-Tru hardware, with most service calls completing in one visit. See our brands for full performance tier and warranty documentation.
Pricing for Windows & Doors in Wellington, FL
| Service | Typical range in Wellington |
|---|---|
| Vinyl single-hung replacement window | $650 - $1,200 |
| Impact aluminum double-hung window | $1,400 - $2,800 |
| 3-panel sliding window (vinyl) | $2,200 - $4,500 |
| 3-panel sliding window (impact aluminum) | $3,800 - $7,200 |
| Standard fiberglass entry door | $1,800 - $3,500 |
| Impact-rated entry door system | $3,200 - $6,800 |
| Oversized impact door with sidelites | $5,500 - $12,000 |
| Low-E/argon energy-efficient window | $850 - $1,650 |
| ENERGY STAR impact aluminum window | $1,850 - $3,600 |
| Hurricane-rated garage door (16×7) | $2,800 - $5,500 |
| Custom arched/curved window | $1,800 - $4,200 |
| Oversized custom window/door system | $4,500 - $12,000 |
Price in Wellington is driven primarily by impact rating requirement, opening size, and the condition of the existing frame and surrounding block. Every estimate we provide is a written, line-item document that does not change once work begins; Haven Clause 1 means the measured survey and the quote are the same document.
Neighborhoods We Serve in Wellington
We install windows and doors across Wellington’s full village limits, from the original subdivisions to the equestrian estate corridors. Scheduling and dispatch are coordinated from our Miami office, with crews serving Wellington locally. Most appointments are available within three to five business days of your call.
- Olympia
- Binks Forest
- Palm Beach Polo
- Greenview Shores
- Equestrian estate corridors
Service Area - Cities Near Wellington
Our crews serve the full Palm Beach County corridor from our South Florida dispatch office. We regularly install windows and doors in Royal Palm Beach, FL, Lake Worth, FL, Greenacres, FL, and West Palm Beach, FL, with the same Haven Standard documentation and written-price guarantee at every location.
Serving Wellington, FL - Our Local Coverage Area
We’re based in the Wellington area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Windows & Doors in Wellington
Most Wellington subdivisions, including Olympia and Binks Forest, have architectural review committees that require pre-approval of exterior changes. We provide product data sheets, color samples, and installation details for your HOA packet as part of our standard process; submit these before permitting to avoid delays.
Ensure all openings are protected with impact-rated products or approved shutters, with documentation visible for the inspector. We provide the product approval numbers, installation certificates, and photo records that satisfy Palm Beach County inspector requirements; schedule the inspection after our work passes county final.
We schedule installations year-round, including the January-April show season, with coordination around estate events and barn operations. Equestrian properties often require impact compliance for outbuildings; we pull the additional permits and engineering documentation that out-of-county crews frequently miss.
Call (561) 461-2062 to schedule your free measured survey. The written price we leave with you is the same document that governs the installation, and every job is covered by our 365-Day Done Right Promise.
What happens when you call
- 1A real person answersNo phone trees - talk to a local windows & doors pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Wellington Customers Say
"Good crew, tidy install, finished a day early. Paperwork had the license number on it."
- Barry L."Replaced eight windows. They showed me the U-factor on the units they were actually fitting rather than the brochure numbers."
- Kofi B."They photographed the rotten sill they found under the old frame before replacing it, and the extra cost was agreed in writing before they carried on."
- Rosalind C.